| ◆ |
Item |
Specifications |
| ◆ |
Control-axes |
3axes(X,Y,Z) |
| ◆ |
Simulatory |
3
axes (X,Y,Z) |
| ◆ |
Control-preciation |
0.001mm |
| ◆ |
Max.programming
value |
±9999.999mm |
| ◆ |
Program
storage volume |
31KB
power-off protection |
| ◆ |
Work-state |
File,Dry
Run,Automation,Manaul,Zero restoring,MDI,Tool
presetting,Parameter setting |
| ◆ |
Rapid
traverse federate |
12000mm/min |
| ◆ |
Cutting
speed |
0.001-6000mm/min |
| ◆ |
Feedrate
override |
5%、10%、20%、40%、60%、80%、100%、120% |
| ◆ |
Display |
5.7”
LCD Display |
| ◆ |
Program
edit |
Increment/Absolute
or mixed command |
| ◆ |
Compensation
function |
Backlash
compensation,Tool radius compensation |
| ◆ |
G
function |
G00
Rapid positioning,G01 Line interpolation,G02、G03
Circle interpolation，G04 Delay,G22、G80
Program cycles,G23 Canned cycles for
rectangle,G26、G27、G28、G29 Start position
return, G46、G36、G37、G38、G39 Reference
position return,G95、G99 Feed/Rev |
| ◆ |
M
function |
M00
Program halt, M02、M12、M30 Program
end,M20、M13 Automatic cycle,M03 Spindle
positive rotate, M04 Spindle reverse-rotate,M05
Spindle stop,M07-M09 M22-M29 Send signal,M21、M06
Wait for the back signal,M97 Program
jump,M98、M99 Canned cycles |
| ◆ |
Automation
|
tart
or halt at any position,Start from any
program section,Single block or continuous
operation, Dynamic coordinate display,operating
program display,Feedrate and spindle
override amendment,Display F,M parameter
Stroke limit protection,DNC Real-time
communication |
| ◆ |
MDI |
G,S,T,M
command input by hand |
| ◆ |
Zero
restoring |
axes
return to start position |
| ◆ |
Manaul |
Speed
level(1-9) ,single or jog feed,Increment
feed,External manual pulse generator
X1,X10,X100 |
| ◆ |
Tool |
Reference
position setting and return |
| ◆ |
Parameter
setting |
Parts
number setting,Rapid feedrate setting,Program
section number increment setting,Backlash
compensation setting,Frequency curve
setting,Dry run setting,Soft stroke
limit setting,Electric gear setting |
| ◆ |
File |
Display
the program section number and volume;Program
edit,search and modify; Program diagnose,copy
and delete;RS232 communication |
|
|
|
