| ◆ |
Item |
Specifications |
| ◆ |
Control-axes |
2axes(X,Z) |
| ◆ |
Control-preciation |
0.001mm |
| ◆ |
Max.programming
value |
±9999.999mm |
| ◆ |
Program
storage volume |
31KB
power-off protection |
| ◆ |
Work-state |
File,Dry
Run,Automation,Manaul,Zero restoring,MDI,Tool
presetting,Parameter setting |
| ◆ |
Rapid
traverse federate |
12000mm/min |
| ◆ |
Cutting
speed |
0.001-6000mm/min |
| ◆ |
Feedrate
override |
5%、10%、20%、40%、60%、80%、100%、120% |
| ◆ |
Display |
5.7”
LCD Display |
| ◆ |
Program
edit |
Increment/Absolute
or mixed command |
| ◆ |
Compensation
function |
Backlash
compensation,Tool radius compensation |
| ◆ |
G
function |
G00
Rapid positioning,G01 Line interpolation,G02、G03
Circle interpolation，G04 Delay,G22、G80 Program
cycles,G23 Canned cycles for rectangle,G26、G27、G28、G29
Start position return, G46、G36、G37、G38、G39
Reference position return,G95、G99 Feed/Rev |
| ◆ |
M
function |
M00
Program halt, M02、M12、M30 Program end,M20、M13
Automatic cycle,M03 Spindle positive rotate,
M04 Spindle reverse-rotate,M05 Spindle stop,M07-M09
M22-M29 Send signal,M21、M06 Wait for the
back signal,M97 Program jump,M98、M99 Canned
cycles |
| ◆ |
Automation
|
tart
or halt at any position,Start from any program
section,Single block or continuous operation,
Dynamic coordinate display,operating program
display,Feedrate and spindle override amendment,Display
F,M parameter Stroke limit protection,DNC
Real-time communication |
| ◆ |
MDI |
G,S,T,M
command input by hand |
| ◆ |
Zero
restoring |
axes
return to start position |
| ◆ |
Manaul |
Speed
level(1-9) ,single or jog feed,Increment feed,External
manual pulse generator X1,X10,X100 |
| ◆ |
Tool |
Reference
position setting and return |
| ◆ |
Parameter
setting |
Parts
number setting,Rapid feedrate setting,Program
section number increment setting,Backlash
compensation setting,Frequency curve setting,Dry
run setting,Soft stroke limit setting,Electric
gear setting |
| ◆ |
File |
Display
the program section number and volume;Program
edit,search and modify; Program diagnose,copy
and delete;RS232 communication |
|
