| ＃ |
Item |
Specifications |
| ＃ |
Power |
Effective
value of phase current shoule not be greater
than 4.5A |
| ＃ |
Output
phase current |
Effective
value of phase current shoule not be greater
than 4.5A |
| ＃ |
Suit
motor |
Three
phase hybrid step motor |
| ＃ |
Work
environment |
0≧-40≧
Relative humidity 30-95% ( no condensate water
);Conditions without corrosive,flammable,explosive,electric
gas,liquid and dust |
| ＃ |
Conserve environment |
-40≧-55≧ Relative humidity95%(no condensate
water) |
| ＃ |
Drive mode |
PWM,Three phase sinusoid wave current output |
| ＃ |
Stride angle |
0.3＜、0.036＜、0.045＜、0.06＜、0.072＜、0.09＜、0.12＜、0.144＜、0.18＜、0.3＜、0.36＜、0.45＜、0.6＜、0.72＜、0.9＜ |
| ＃ |
Pulse per rev |
12000、10000、8000、6000、5000、4000、3000、2500、2000、1200、1000、800、600、500、400 |
| ＃ |
Protection state sign |
Green LED RDY:In order sign,light when there
is no problem
Red LED ALM1:IPM model doesn¨t work well;ALM2:Overvoltage
ALM3:Undervoltage ALM4:Brake doesn¨t work
well
|
| ＃ |
Stride angle |
DIP switch setting(SW1、SW2、SW3、SW5),(input
signal SW5 MIS are equivalent) |
| ＃ |
Output signal |
RDY1/RDY2(ready),put through when there
is no alarm ,Load 30V,0.5A(MAX) |
| ＃ |
Input signal |
CP/CP:DIR/DIR;EN/EN(Enable);MIS/MIS(Subdivision) |
| ＃ |
Input voltage level |
When 12V,a 1k resistor should be fit in
series;When 24V a 2.2K instend |
| ＃ |
Phase remembered afterpower-off |
The present phase will be remembered after
the driver power-off |
| ＃ |
Automatically decreaselock current |
3 seconds after the cease of the input pulse
the lock current will be automatically decrdased
by half |
| ＃ |
Position pulse input mode |
Single pulse mode:CP(Pulse)+DIR(Direction)
pulse width>lus;Pulse frequency<100KHz;DIR
Signal going before CP signal > 10us |
| ＃ |
Dimension |
240*160*90 |
| ＃ |
Weight |
2.5Kg |
